 |
|
The flow of fuel through your engine is
controlled by the cylinder head & valves.
A level head ensures smooth power
and performance from your engine.
|
|
|
Grind & Polish Valves & Seats
|
|
By grinding and polishing your valves and valve seats, you can maximize the efficiency of the fuel flow control system and minimize power loss through badly seated or bent valves. |
|
|
Head surfacing
|
|
A smooth level surface on the cylinder head ensures a solid connection with the entire surface of the cylinder block.
We can also lower the profile of your head by removing metal from the mounting surface, increasing the compression ratio and power output of your engine. |
|
|
Seat & Guide Replacement
|
|
Valve seats and guides can get burnt out if you have engine trouble. We can grind or drill out the old seats and guides, and replace them with brand new ones, ensuring efficient running of your engine.
We can also replace seats and guides with different metals to allow some wieght reduction, or for natural gas and propane conversions where engine temperatures vary. |
|
|
Port Cleaning & Modifications
|
|
Intake and exhaust ports are essential to efficient engine operation. We thoroughly clean all the ports on your head using chemical process as well as manual inspection and spot cleaning of carbon buildups.
Port modification can be done to allow a larger volume of intake and exhaust capacity, which increases the engine's efficiency at high RPM. |
|
